The Arrest System Central Units FSZ Basis is power supply, control unit, hand switch, alarm storage and reset-switch in one unit
Description:
The Hekatron FSZ Basis Arrest System Central Unit is a hold-open control unit which fulfils the testing specifications of the DIBt (German Institute for Structural Engineering) as well as the requirements of the DIN EN 14637. It is suitable for application in doors and gates in various fields, from industrial to administration buildings. This system is particularly suited to damp, dusty, warm and cold environments, and can withstand temperatures from -10°C to +50°C. Fault causes can be tracked via the LED flash code on the keypad. The system’s DIP switch can be used to activate alarm storage and line surveillance. Its signal output is a relay with potential-free alternating contact. The power supply unit is equipped to deal with short-circuits and excess temperature shutdown. The FSZ Basis replaces the reliable NG 519 and can also be integrated into existing facilities.
Properties:
- Power supply, control unit, pushbutton, temporary alarm memory, and reset key in one
- Conforms to DIN EN 14637 and DIBt regulations.
- Backward compatible to existing arrest systems so can be modernised at low cost.
- Optional circuit monitoring in accordance with DIN EN 14637
- Saves alarm settings
- Separate control unit settings possibilities through two alarm outputs
- Cable entry points at the top, bottom, or the back of the unit
- Easily accessible connection terminals
- Protected against short circuits
- Compatible with all supply networks and earlier models
- Cable glands (M16 and M20 x 1.5 with locknut), mounting set, end module, and assembly instructions included
- Integrated manual release button conforming to standard and reset buttons.
Login