Feig Electronic 3-phase frequency converter control unit for doors, supply voltage 3x200 - 480 V, for drives up to 2,2 kW (5A) with electronic or digital limit switch, with 24V (3500mA) power supply for accessories, monitored 24V brake, in large enclosure, with mains switch, includes connection cable with CEE-plug
Description:
The door control unit TST FUF3-AH by FEIG Electronic is a controller with built-in frequency converter for drives with up to 2,2kW. The frequency converter allows for soft-start and -stop of the doors, resulting in reduced mechanical wear and longer product lifetime. With an increased opening speed of the door, processes can be optimized and waiting times can be reduced. The unit comes with a 24V/ 3500mA power supply for external accessoies, like radar sensors, signal lights etc. It works with digital or mechanical limit switches for door positioning. Due to the very wide range of parameter adjustments offered by all FEIG control units, the TST FUF3-AH can be programmed for many different doors functions. The parameter setting is done by using the push-buttons and full text display of the controller, no additional accessories needed! Installation of the controller is easy and the auto-setting and calibration feature of the controller simplifies it even further as it automatically sets the frequency converter parameters for soft-start and -stop.
Properties:
- Large enclosure with built-in mains switch
- Frequency converter allows for variable and adjustable door speeds
- Soft-start and soft-stop feature
- For drives up to 2,2kW
- wide power supply range 3~200 - 480 V AC
- Fulfils the required standards for door controls (TüV, CE)
- 2 integrated interfaces for sensing edges (resistive or optical systems)
- 2 slots for optional plugin-cards, eg. 2-channel radio, 2-channel loop detector or 6-channel safety control card
- Programmable time switch
- Diagnostic LED on all inputs
- USB-Interface for service purposes
- Optional I/O-extension with plugin-card (for 6 inputs, 7 outputs, time switch, 2-channel loop detector, external display, RS485- and CAN-interface)
- Interface for the optional module TST RFUFxCOM for parallel operation of two doors
- Pluggable, colour-coded connectors for all control functions
- Up to 20 (+6) digital inputs and 3 (+6) relay outputs are set with standard functions as factory default
24V-Supply external Accessories: | 3500 mA |
---|---|
Additional Functions: | Partial Opening, Timer-to-Close |
Drive Frequencies: | 6 - 200 Hz |
Max. Drive Current: | 5 A |
Max. Drive Power: | 2.2 kW |
Max. Operating Temperature: | +50 °C |
Min. Operating Temperature: | -20 °C |
Modes of Operation: | Automatic, Hold-to-Run |
Programmable Relay Contact: | 2 |
Protection Class: | IP 65 |
Radio Function: | Optional |
Sensor Inputs: | Airwave Switch, Optical Sensing Edges, Photo Eye, Pull-In Protection, Resistive Sensing Edge (8k2) |
Supply Voltage: | 3N~200 - 480 V |
Login